How to Clean Your Extraction and Dab Tools
Cleaning Extraction Tubes
Extracting cannabis concentrates has become increasingly popular in the past few years. If you extract your own concentrates, then you know that time is money. Cleaning your BHO or other extraction tubes can take a significant amount of time and energy. Kryptonite's new Cannabis Extractor Cleaner makes cleaning all your extraction gear quick, easy and safe.
Get a soaking tray
One of the easiest ways to clean all your extraction tubes is to get a wall paper tray from Home Depot. These are long, thin and relatively shallow trays that extraction tubes will easily fit into.
Dilute Kryptonite with water
Our new Kryptonite Cannabis Extractor Cleaner can and should be diluted when cleaning extraction tubes. If using a wallpaper tray, use 3-5 oz. Extractor Cleaner and fill the rest of the tray with warm water.
Remove plant matter and soak
Remove any plant matter that remains in the extraction tubes being cleaned. Place the extraction tubes into the diluted solution in the soaking tray. Let soak for 10-15 minutes.
Brush if necessary
If your extraction tubes are extremely dirty, you may need to use a traditional tube brush to remove any remaining debris from the tubes. To speed up this process, soak your tube brush in the solution and brush the inside of the tubes until clean.
Rinse with warm water
Rinse your extraction tubes with warm water. Let air dry if necessary.
Cleaning Pyrex Trays
When it comes to extracting cannabis concentrates, you know that "time is money." Since there are a lot of implements used during the extraction process, cleaning all of your equipment after each extraction can be very time consuming. With Kryptonite Cannabis Extractor Cleaner, cleaning your pyrex glassware is easier than ever before.
Remove the BHO
Remove all of your valuable butane hash oil from the pyrex dish or tray being cleaned.
Clean with Kryptonite and a sponge
If your trays aren’t that dirty or sticky pour a small amount of Kryptonite onto a sponge and begin washing your tray like you would clean a dish.
Soaking your trays with diluted solution
Soaking your trays in Kryptonite is an effective way to clean without consuming a lot of time. Fill the Pyrex tray or dish with warm water and 3–4oz of Kryptonite. Thoroughly mix the diluted solution (tip: this solution can be reused multiple times). Let the solution soak the tray for 5 to 10 minutes.
Clean pyrex tray or dish with a sponge
Use a kitchen sponge to wash off all remaining BHO from the tray. Pour the remaining solution into a container for reuse.
Rinse with warm water
Rinse your pyrex dish or tray with warm water and it’s ready to use!
Recycling Your Solution
You can recycle the diluted Kryptonite-water solution for use on multiple trays! This not only saves you money, but it's also great for the environment. You can pour the diluted Kryptonite solution between trays after each tray soaks for approximately 10 minutes and not have to worry about using all of your Kryptonite Cannabis Extractor Cleaner to just clean one batch of Pyrex glassware or extraction tubes!